Whoops, screwed the pooch..Big Time

If your thread is marked, "Moved," it means that it may also be of value in the forum it has been moved to.
Post Reply
User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

I just finished a "almost perfect" brew day. Three gallon biab kit from Northern Brewer, (Oatmeal Cookie Brown Ale). (Almost the last of these kits. Very soon, I'll only use the recipes from Brewing Classic Styles, as Scott had recommended several times).

After I had done my mash by the book, hovering around the kettle, I realized that my thermometer was flaky and had been reporting that the mash was 10 degrees (Farenheit) hotter than it really was, therefore, it was 10 degrees cooler than it should have been. Get this: my OG weighed in at 1.080!! I'm pretty much at a loss of what I'm going to wind up with. Maybe I can use it for fuel in my lawn mower.

I hydrated one package of Nottingham. I'm wondering how much it'll do before it flocks out. There should be enough cells since it's a 3 gallon batch.

I'm kind of afraid of the beer, It gowled at me when I walked into the room.

Greg


goulaigan
Gold
Gold
Canada
Posts: 578
Joined: 3 years ago
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City: Goulais River

Re: Whoops, screwed the pooch..Big Time

Post by goulaigan » 4 months ago

Lol, 'it growled at me'...

Well, the good news is it will be beer :)

What was the OG supposed to be? And what was the actual mash temp do you think? You obviously got good conversion, beer might be a touch dry though...

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

goulaigan wrote:
<span title="02 May 2017, 23:11">4 months ago</span>
Lol, 'it growled at me'...

Well, the good news is it will be beer :)

What was the OG supposed to be? And what was the actual mash temp do you think? You obviously got good conversion, beer might be a touch dry though...
Hi,
The OG was supposed to be 1.066.
The mash temp was supposed to be.around 154 degrees F. I think it was around 144ish

This A.M., it is happily bubbling away. Grrrrrrr. My dog's hiding in her kennel.

Greg


Jamato
Draft
Draft
United States of America
Posts: 60
Joined: 4 months ago
Region: USA & Canada
Preferred Brewing Method: Multi-Vessel All-Grain (MVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by Jamato » 4 months ago

hang on, that will be rocket fuel ;)
Temperance is for those who cannot hold their liquor :drink: :drink:

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

Jamato wrote:
<span title="02 May 2017, 23:27">4 months ago</span>
hang on, that will be rocket fuel ;)
The good thing is that I have thirsty friends.


goulaigan
Gold
Gold
Canada
Posts: 578
Joined: 3 years ago
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City: Goulais River

Re: Whoops, screwed the pooch..Big Time

Post by goulaigan » 4 months ago

Interesting, seems odd to me that you would get that high an OG just because of temp mishap.

I mean you would be converting starch at either temp, just that the higher end would be less fermentable and lower end more fermentable... Did your volumes come out as expected? Seems like there is perhaps another factor here...

In any case, with some aging I'm sure it will be fine, perhaps a little dry for an oatmeal stout but perhaps the oatmeal will help with that. Interested to hear how it turns out...

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

goulaigan wrote:
<span title="03 May 2017, 03:14">4 months ago</span>
Interesting, seems odd to me that you would get that high an OG just because of temp mishap.

I mean you would be converting starch at either temp, just that the higher end would be less fermentable and lower end more fermentable... Did your volumes come out as expected? Seems like there is perhaps another factor here...
I came in about a quarter of a gallon shy of the 3 gallon mark.

Either way, I'll report to y'all the results.

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

Do you think Nottingham yeast will be able to handle the high alcohol?


Jamato
Draft
Draft
United States of America
Posts: 60
Joined: 4 months ago
Region: USA & Canada
Preferred Brewing Method: Multi-Vessel All-Grain (MVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by Jamato » 4 months ago

my experience with nottingham is that it is very aggressive and leaves less residual sugars than normal London yeast
I have used it for some medium strong brews, up to about 7.5%. and it chewed right through it.
Now over that, I usually finish off a brew with champagne yeast, such as my Heavy Scotch or Imperial Stout. ( an idea I read about in a old brewing book years ago) some call that cheating But I feel I am getting the benefit of the beer yeast in flavors and just chewing through the other sugars with the champagne yeast. That limits my knowledge of where nottingham finishes off at, but it gives you a idea for if your yeast drops out before you want it too.

I have seen a yeast called super yeast, sold by either white labs or Y Yeast but have never used it, it is suppose to be highly tolerant of ABV amount.
Temperance is for those who cannot hold their liquor :drink: :drink:

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

Jamato wrote:
<span title="07 May 2017, 10:56">4 months ago</span>
my experience with nottingham is that it is very aggressive and leaves less residual sugars than normal London yeast
I have used it for some medium strong brews, up to about 7.5%. and it chewed right through it.
Now over that, I usually finish off a brew with champagne yeast, such as my Heavy Scotch or Imperial Stout. ( an idea I read about in a old brewing book years ago) some call that cheating But I feel I am getting the benefit of the beer yeast in flavors and just chewing through the other sugars with the champagne yeast. That limits my knowledge of where nottingham finishes off at, but it gives you a idea for if your yeast drops out before you want it too.
Hi Jamato,

It's so happens that I do have a packet of champagne yeast that I did not put into a wine that I made. This beer is going to be absurdly high. My pre-boil gravity was where my original gravity was supposed to be: 1.064.

According to SeanTerrel.com. Which has a marvelous refractometer calculator, my estimated alcohol by volume should be around 15.7

Maybe I'll use it as a paint stripper. :-)


goulaigan
Gold
Gold
Canada
Posts: 578
Joined: 3 years ago
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City: Goulais River

Re: Whoops, screwed the pooch..Big Time

Post by goulaigan » 4 months ago

I don't think you will be hitting 15% abv starting out at 1.08... even if it comes down to 1.0 you would be just over 10. My guess is you end up around the 8% mark, but I don't have much experience with Notty...

Do you have a hydrometer?
Last edited by goulaigan on 07 May 2017, 21:57, edited 1 time in total.

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

goulaigan wrote:
<span title="07 May 2017, 21:52">4 months ago</span>
I don't think you will be hitting 15% abv starting out at 1.08... even if it comes down to 1.0 you would be just over 10. My guess is you end up around the 8% mark, but I don't have much experience with Notty...

Do you have a hydrometer?
Yes I do. I use it along with the refractometer
I just figure the more data the better. So we shall see. I'll keep you posted.


Scott
Gold
Gold
United States of America
Posts: 658
Joined: 3 years ago
Location: Jefferson, Oregon, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by Scott » 4 months ago

Greg - have you pitched Yeast yet? Just reading this. If you wound up too high gravity and had low volume, culprit is likely excessive evaporation. An easy fix by adding water to dilute. The BIABacus has fields for dilution.

EDIT - Here is a link that can help with the mechanics of dilution:
viewtopic.php?f=152&t=3680&p=54559&hilit=Oldgit#p54559
And there are many other links that can help, if searching the site for dilute or dilution. I believe with dilution and adding water prior to pitching, it ends up lowering the IBU as well.?.?. Not sure how that happens if it is low on water due to evaporation but that is what I see in the BIABacus software with making dilutions to my beer. Perhaps Pat could comment on that...? No doubt there is a reason, not quite obvious to me right now.
Last edited by Scott on 08 May 2017, 05:13, edited 2 times in total.

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

Crap, I just lost my reply. That'll teach me not to use my phone. ;-)

Hi Scott,

I'll bet a dollar for donuts that the culprit was evaporation (along with too low a mash temperature). I looked at the link that you posted and I'll view it a number of times more for sure. It'll take a while to sink in.

Unfortunately, I pitch already, but I did a load of wrong things, including checking my gravity after I pitched (forgot to do so beforehand).

Oh well, lessons well learned. I'm not sweating this as long as I learn something. Thanks again for weighing in.

Greg


RedWino
Draft
Draft
Ireland
Posts: 7
Joined: 3 years ago
Region: Europe
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City: Dublin

Re: Whoops, screwed the pooch..Big Time

Post by RedWino » 4 months ago

That'a massive boil-off rate...

I'f I'm not looking at the wrong instructions ten that kit recommends starting with 5.5 gallons of water - and a 60 min boil time.

Everyone's setup is different, with variations over the seasons, but I get a boil-off rate of ~1.3 gal / hour.

Maybe you started with less water - or boiled for longer?

User avatar

Topic author
gvhorwitz
Gold
Gold
United States of America
Posts: 42
Joined: 3 years ago
Location: Expatriated Hoosier living in South Windsor, CT
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by gvhorwitz » 4 months ago

RedWino wrote:
<span title="08 May 2017, 22:44">4 months ago</span>
That'a massive boil-off rate...

I'f I'm not looking at the wrong instructions ten that kit recommends starting with 5.5 gallons of water - and a 60 min boil time.

Everyone's setup is different, with variations over the seasons, but I get a boil-off rate of ~1.3 gal / hour.

Maybe you started with less water - or boiled for longer?
Hi, that's it, I boiled for 90 minutes. Oh well live and learn

User avatar

Mad_Scientist
Gold
Gold
United States of America
Posts: 1680
Joined: 6 years ago
Location: Panhandle of Florida, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by Mad_Scientist » 4 months ago

gvhorwitz wrote:
<span title="07 May 2017, 12:38">4 months ago</span>
Jamato wrote:
<span title="07 May 2017, 10:56">4 months ago</span>
my experience with nottingham is that it is very aggressive and leaves less residual sugars than normal London yeast
I have used it for some medium strong brews, up to about 7.5%. and it chewed right through it.
Now over that, I usually finish off a brew with champagne yeast, such as my Heavy Scotch or Imperial Stout. ( an idea I read about in a old brewing book years ago) some call that cheating But I feel I am getting the benefit of the beer yeast in flavors and just chewing through the other sugars with the champagne yeast. That limits my knowledge of where nottingham finishes off at, but it gives you a idea for if your yeast drops out before you want it too.
Hi Jamato,

It's so happens that I do have a packet of champagne yeast that I did not put into a wine that I made. This beer is going to be absurdly high. My pre-boil gravity was where my original gravity was supposed to be: 1.064.

According to SeanTerrel.com. Which has a marvelous refractometer calculator, my estimated alcohol by volume should be around 15.7

Maybe I'll use it as a paint stripper. :-)
I just couldn't let this go without mentioning this. I too used to use ST dot com refractometer calculator, BUT NOT ANY MORE! Please read this thread >>> linked below <<<, especially the most recent ones from a year ago. This calculator does not give you good SG reading. I am glad you also use a hydro. :clap:

http://biabrewer.info/viewtopic.php?f=49&t=1489

MS


PistolPatch
Gold
Gold
Australia
Posts: 5284
Joined: 7 years ago
Location: Perth, Western Australia
Region: Oceania
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by PistolPatch » 4 months ago

Got some good laughs reading the above :lol:. Nottingham is scary!

I've only read the above through once so if I get something wrong, let me know.

If you used the directions given with the kit, you'll end up with a high OG for sure because, without doubt, the kit will be based on a "generic" kettle efficiency and that will be lower than reality. In other words, you should get more volume than the kit suggests. Use the BIABacus to get much closer to reality, check your gravity at pitching at two different times (eg, cool an end of boil sample and then take another sample after chilling). Gravity should always be double-checked before making your pre-pitching corrections (hopefully a dilution).

Don't use a refractometer. This post in the thread that MS linked shows some of the problems. (Only time I use a refractometer now is for a high gravity brew that requires a very long boil time. The refracto, in this case, is used only to tell me the rate of gravity change, not the gravity itself. I won't go into the reasons why, or the complete method, as it's a rare situation.)

Scott mentioned dilutions and IBU's. On nearly all brews you should be diluting. Why? Because you can't accurately predict your evaporation rate - it changes from brew day to brew day depending on weather. Your aim should be to be using the lowest evaporation rate in your calculations (eg that for a a calm, humid day). This way you always end up with a stronger wort that can be corrected with dilution rather than a weak wort that is much harder to correct.

The IBU's are not a worry in dilution because, if the wort is too strong, the IBU's will be equally stronger too. Diluting fixes both.

Keep up the comedy Greg :thumbs:
If you have found the above or anything else of value on BIABrewer.info, consider supporting us by getting some BIPs!


Jamato
Draft
Draft
United States of America
Posts: 60
Joined: 4 months ago
Region: USA & Canada
Preferred Brewing Method: Multi-Vessel All-Grain (MVA)
City:

Re: Whoops, screwed the pooch..Big Time

Post by Jamato » 4 months ago

I love it......Nottingham is scary.........
I have used it, but prefer London for my English ales
that said, I have a friend (?) on the street over who loves Nottingham, but he watches real close and kills fermentation when it hits his goal. I have asked him why and he likes quick fermentation, is retired so he his time to watch his beer closely and loves the esters of Nottingham. As long as he keeps under watch he can kill it when he hits the level he wants
bit to much work for me when I get the same results in my ESBs from London and not having to work so hard.
Temperance is for those who cannot hold their liquor :drink: :drink:

Post Reply

Return to “Brew Day Stories and/or Pics”

Brewers Online

Brewers browsing this forum: No members and 6 guests