Fast ferment test and a PP trick

Also see Yeasts
Post Reply
User avatar

Topic author
Mad_Scientist
Gold
Gold
United States of America
Posts: 1686
Joined: 6 years ago
Location: Panhandle of Florida, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Fast ferment test and a PP trick

Post by Mad_Scientist » 5 months ago

Recently I picked up on something new I have never done until now. I got interested in the low oxygen brewing website and picked up another (cold side tip).

Ever since I have been pressure fermenting I have been just letting it ferment all the way it would go, then at FG do the closed transfer to a serving keg thing. I lost my last double batch (yes all 10 gallons) when air was sucked in due to worn out corny keg post o-rings. So to never repeat that again, it's advised to transfer when there is still remaining extract left, at least 1 °Pluto / 4 gravity points. This is the link that they provided; http://braukaiser.com/wiki/index.php?ti ... rment_Test I did this test using bread yeast.

Also (this deserves its own thread) used one of PistolPatch's tricks, the old put a hydro jar in the fermenter chamber to monitor its progress trick. I had evaporation over time, but when I topped it back up with water I got accurate results.


This is my result
https://goo.gl/photos/uF5MzAgUE6pwTVcc6

Good double check with my refractometer
https://goo.gl/photos/PEi7g6UJFEySkn6M9

These two allowed me to make the right decision for the go-ahead transfer. :smoke:
MS

Post Reply

Return to “Fermentation (Wort to Still Beer)”

Brewers Online

Brewers browsing this forum: No members and 2 guests