Bottling bucket modification

Assumes carbonation of flat beer is done using a priming sugar.
Post Reply

Topic author
rockbotton
Gold
Gold
United States of America
Posts: 128
Joined: 6 years ago
Location: South Carolina, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Bottling bucket modification

Post by rockbotton » 4 years ago

This link will take you to a bottling bucket modification that will get practically all the beer from your bottle bucket without tilting. This is not a new mod but it is simple and does a good job.
http://www.mrbeerfans.com/ubbthreads/ub ... Post215960

I did this mod on my bottling bucket and now looks like I will have to do again if I add the second bottling wand. :think:
Last edited by rockbotton on 15 Aug 2013, 07:22, edited 2 times in total.
Fermenting:

Bottle Conditioning
Robust Porter
Blue Moon Clone
SWIMBO Slayer
Up Next:
Kolsch


Lars
Gold
Gold
Posts: 222
Joined: 6 years ago
Location: Meath, Ireland
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Bottling bucket modification

Post by Lars » 4 years ago

Hi Rockbotton, this is my version of that mod. My copper pipe is about 10mm and the bung is silicone food grade from brouwland. Image Image Image I still tilt the bucket but something like a beer mat is enough to get all but the last few ml out. When you add the second spigot place it near the bottom but there's no point in a 2nd dip tube. With a 2nd dip tube you could end up with 2 half full bottles.
Last edited by Lars on 15 Aug 2013, 08:29, edited 2 times in total.


Topic author
rockbotton
Gold
Gold
United States of America
Posts: 128
Joined: 6 years ago
Location: South Carolina, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Post by rockbotton » 4 years ago

Good point Lars, had not considered that.
That will make it a lot simpler to add the second bottle filler.
Fermenting:

Bottle Conditioning
Robust Porter
Blue Moon Clone
SWIMBO Slayer
Up Next:
Kolsch

User avatar

BobBrews
Gold
Gold
United States of America
Posts: 2745
Joined: 7 years ago
Location: Central Wisconsin USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City: Shantytown

Post by BobBrews » 4 years ago

This is what I bought and use on my fermentation buckets. You replace the regular nut with this invert tube. Simple but not free. do it yourself is OK too!

http://www.williamsbrewing.com/INVERT-T ... 9C104.aspx
Last edited by BobBrews on 15 Aug 2013, 20:46, edited 2 times in total.
tap 1 Raspberry wine
tap 2 Bourbon Barrel Porter
tap 3 Czech Pilsner
tap 4 Triple IPA 11% ABV

Pipeline: Mulled Cider 10% ABV

http://cheesestradamus.com/ Brewers challenge!

Post Reply

Return to “Bottling”

Brewers Online

Brewers browsing this forum: No members and 2 guests