SODA-STREAM C02 BOTTLE ADAPTOR

Assumes carbonation of flat beer is done using a forced or gradual injection of CO2.
Post Reply
User avatar

Topic author
shibolet
Gold
Gold
Posts: 554
Joined: 7 years ago
Location: Modiin, Israel
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

SODA-STREAM C02 BOTTLE ADAPTOR

Post by shibolet » 6 years ago

any have any experience with one of these?

http://www.pinnaclewholesalers.com.au/p ... LE_ADAPTOR
Cube:
fermenter: Sourdough Spelt Ale, Classic Lambic, Oud Brune, Barrel Aged Belgian Dubbel
Kegs: Bob's Black IPA, Blanc Blond, Soda...
to be brewed:

User avatar

wizard78
Gold
Gold
Posts: 489
Joined: 7 years ago
Location: Somerville, Vic, Australia
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Post by wizard78 » 6 years ago

I think they get used a lot down here in oz, particularly in party/portable keg setups. You might want to search http://www.aussiehomebrewer.com I think they get a bit of use from the guys on that forum.
Cheers
Last edited by wizard78 on 29 Apr 2011, 05:51, edited 5 times in total.
"All right, brain. You don't like me and I don't like you, but let's just do this and I can get back to killing you with beer."
[/i] Homer Simpson K.I.S.S., B.I.A.B.[/b]


NME
Gold
Gold
Australia
Posts: 332
Joined: 7 years ago
Location: Perth
Region: Oceania
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Post by NME » 6 years ago

Oops. I missed this one somehow.

I recently used a soda stream bottle for my portakeg setup with one of these adapters. They work pretty well, but I wouldn't recommend using them without some thread tape over the end. Also, the washer than came with mine was too thick, so I had to get a skinnier one.


BDD
Draft
Draft
Posts: 3
Joined: 4 years ago
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Post by BDD » 4 years ago

+1 on the tape. I use sodastream for my kegs and had a leak coming from the adaptor. Some thread tape fixed it.


pist
Draft
Draft
Posts: 40
Joined: 4 years ago
Location: Newcastle, Australia
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Post by pist » 3 years ago

+2 on the thread tape. These adaptors leak without it. I went through a full cylinder before working out that it was leaking. Since ive been taping the thread on the cylinders ive had no issues

Post Reply

Return to “Kegging”

Brewers Online

Brewers browsing this forum: No members and 3 guests