Possible contamination? Yes or no?

Also see Yeasts
Post Reply

Topic author
Frkleal
Draft
Draft
Posts: 6
Joined: 3 years ago
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Possible contamination? Yes or no?

Post by Frkleal » 1 year ago

Hello everyone, I've found this on secondary while I transferring to my bottling bucket.

Notice the white spots on the krausen collar and the little "oil" stains on beer.
Image Image I tasted the beer 3 days prior to bottling and it tasted and smelled great.

For the record, this batch of IPA had 100 grams of pellet hops used in dry hopping for about 10 days.

Should I worry?


Enviado do meu iPhone usando Tapatalk
Last edited by Frkleal on 10 May 2016, 08:36, edited 1 time in total.


Scott
Gold
Gold
United States of America
Posts: 667
Joined: 3 years ago
Location: Jefferson, Oregon, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Post by Scott » 1 year ago

Hi Frkleal.

If you've followed good sanitation, at this point I would just "go with it"... My opinion. :think: Provided it tastes okay when bottling it. And it likely is okay... I sometimes get different looking rings or things in the beer during fermentation caused by different yeast activity. And different yeasts can look a little different in the fermenter (similar though, normally).

ADDITIONAL - And you didn't ask this, but it might be a help:
I personally do not use a secondary. In my opinion, it is not needed. I used to do it as I thought it would produce clearer beer, helping to get the "trub" out. For the slight bit it may have helped with that it increases potential to get contamination or infection, every time you rack from one thing to the next. If you are able to Cold Crash - that is an incredible help with dropping yeast and things in the beer to the bottom. And again this next one only works well if you can chill your beer but using a small amount of gelatin helps to clear it up nicely too. (See Brulosophy Blog Link: http://brulosophy.com/2015/01/05/the-ge" onclick="window.open(this.href);return false; ... t-results/). I believe these tricks to be far better than using a secondary and lower risk of infection.

Hope this helps!
Last edited by Scott on 10 May 2016, 08:55, edited 1 time in total.

User avatar

Lumpy5oh
Gold
Gold
Canada
Posts: 423
Joined: 3 years ago
Location: ON
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City: Woodstock

Post by Lumpy5oh » 1 year ago

I haven't had any white dots before so I can't comment on them. The oily looking bit I've had many times. I've never had a problem and think that it may be hop oils floating on top.
Some people are like slinkies. Not good for much, but bring a smile to your face when pushed down the stairs.

Weehoosebrewing.ga


Topic author
Frkleal
Draft
Draft
Posts: 6
Joined: 3 years ago
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Possible contamination? Yes or no?

Post by Frkleal » 1 year ago

Thanks everyone!
Scott, I think I've might made a little confusion with the terms in English...
I don't transfer to a secondary bucket either, I do it exactly as you said, just without the gelatin. What I meant is that I found this little white spots after the secondary fermentation.

Kind regards


Enviado do meu iPhone usando Tapatalk


Scott
Gold
Gold
United States of America
Posts: 667
Joined: 3 years ago
Location: Jefferson, Oregon, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Post by Scott » 1 year ago

Okay...

Well at this point the investment in your beer has been made. Difficult to get a good feel by looking at the pictures...not real clear on the white dots. It's probably fine. No reason to throw the beer out unless tastes nasty when racking to bottles.


Scott
Gold
Gold
United States of America
Posts: 667
Joined: 3 years ago
Location: Jefferson, Oregon, USA
Region: USA & Canada
Preferred Brewing Method: Single-Vessel All-Grain (SVA)
City:

Post by Scott » 1 year ago

This is from this morning, Pilsner after 2 days in the fermenter. Lots of "white stuff" on top. There is no problem, but thought of your post.
You do not have the required permissions to view the files attached to this post.

User avatar

Goodtime
Draft
Draft
Australia
Posts: 11
Joined: 1 year ago
Location: Jan Juc, Australia
Region: Please select one...
Preferred Brewing Method: Please select one from below...
City:

Post by Goodtime » 1 year ago

I never panic until it starts to smell and/or taste wrong.

Then it's flat out panic stations.

Luckily this has only occurred once.

Post Reply

Return to “Fermentation (Wort to Still Beer)”

Brewers Online

Brewers browsing this forum: No members and 3 guests