FAQ: What if I don't have a rope and pulley?

Post #1 made 8 years ago
While having a rope and pulley system makes things easier, it is not a necessity for single batches. It is certainly not a major issue especially when starting out.

Industrial rubber gloves are a cheap and handy addition for any all-grain brewer but can be an extra God-send for the BIABrewer without a rope and pulley. Simply lift the bag slowly and twirl it until tight letting the sweet liquor/wort drain into the kettle. Now, just dump the bag. A twisted bag for a standard batch will weigh at this stage around 8kgs (17.6lbs) at most.

Like batch-sparging, you can spend all day waiting for the grain bed to yield every last drop. At some stage, you have to stop though ;). A good guide is to hang the bag from something like a door knob over a food-grade bucket and leave it there while the brew comes to the boil. This will give you an extra litre/pint or so.

Make sure you keep it simple and easy. Spending ten minutes twisting, squeezing and draining a bag is the equivalent to a batch-sparger tilting their mash tun and draining the results into their kettle for the duration of the boil. It will give you a fraction more beer but also more trub and is something easily compensated for by a fraction more grain.

Aim in the long run though to have a rope and pulley system. It just makes things more comfortable.


If you have questions regarding this topic, feel free to ask them here.
Locked

Return to “Bags, Mashers, Thermometers, Kettles etc.”

Brewers Online

Brewers browsing this forum: No members and 3 guests